paypal.continue.text1

paypal.continue.text2
paypal.continue.text3

Odotathan vielä hetken. Tilaustasi käsitellään parhaillaan.

Tulevaisuus on nyt - Huomispäivän fillarit ovat täällä
DT Swiss

DT Swiss H 1950 Classic Etupyörä Center Lock 100/15mm TA 29", black (2020)

ID: 820232
159,95 €
144,99 €
- 14,96 €
Sis. Ilmainen toimitus
Lisää toivelistaan
  • 100 päivän avoin kauppa Ilmaiset palautukset
  • ILMAINEN TOIMITUS YLI 99 €, POLKUPYÖRÄT YLI 499 €6
  • 40 000 tuotetta 600 merkkiä
Tuotetiedot

Valitettavasti tuoteselostetta ei ole tällä hetkellä saatavilla suomeksi.

A mountain bike has to be fun for both climbing and downhill. The DT Swiss H 1950 SPLINE Classic is the perfect wheel for both purposes. Since eMTBs allow the driver to pack many mountains into one ride, reliability is critical. The H 1950 SPLINE Classic meets both requirements. Thanks to their unsurpassed wheel-building know-how and industry-leading test procedures, DT Swiss are able to spec their wheels in such a way that they are precisely matched to the intended field of application. And this is exactly what the developers at DT Swiss have done with this wheel. All you have to do it ride.

HYBRID Hubs
Hybrid hubs have oversized housings with increased wall thickness, are equipped with heavy duty axles and have extra reinforced spoke holders. In addition, they are equipped with new 24T ratchets made of hardened steel as well as oversized bearings and steel rotors. Thanks to these clever features, DT Swiss achieves a permissible maximum system weight of 150 kg with only minimal weight gain compared to a standard MTB hub. The result is a jewel of a hub that can handle the highest torques, offers direct propulsion and, combined with the other HYBRID components, results in extremely robust wheels.

OVERSIZED BEARINGS
All ball bearings in the hubs are oversized to withstand the high loads and run perfectly under the toughest conditions.

HYBRID spokes
To complete the hybrid system, DT Swiss needed spokes that could not only withstand the higher weight and torque of a modern eMTB, but also fitted perfectly to the oversized spoke holders of the hubs. The specially designed spokes have reinforced and oversized Straight Pull spoke heads which, together with the DT Pro Lock Squorx nipples, ensure that all the power you transfer to the hubs is translated into forward movement. Disregarded by many, specifically developed by DT Swiss: hybrid spokes, which are made for this new way of cycling.

HYBRID rims
Lots of climbing and descending on an eMTB can be very tough on the rims. The DT Swiss Hybrid rims feature load-optimised cross-sections and are approved for a system weight of 150 kg. In order to create a super stable, eMTB specific rim, the developers have increased the strength and material thickness where it makes sense. Available in various widths, you are sure to find the right model for your riding style and terrain. Made for the harder, faster and more ambitious biking of the future. Hybrid wheels from DT Swiss have higher wall thicknesses and are approved for a system weight of 150 kg.

DT pro lock technology
The screw locking system injected into the nipples enables the construction of extremely durable impellers. DT pro lock nipples prevent the spoke-nipple connection from loosening automatically. The integrated, patented screw locking system in the nipple thread is based on a two-component adhesive. As soon as the nipples are screwed in, an adhesive is activated which cures completely at room temperature after approx. 6 - 7 hours. If necessary, the wheel can be used immediately after assembly. Multiple re-centering is possible without any problems. However, the adhesive strength decreases slightly with each re-centering.

TUBELESS Technology
Tubeless tyres offer some key advantages over the conventional combination of tyre and inner tube.

No special tools
No special tools are required for normal maintenance

Ominaisuudet
Käyttötarkoitus
MTB  
Suunniteltu sähköpyörille
kyllä  
Malli
Etu  
Akselisysteemi
etukiekko 15x100  mm
Akselistandardi
pistoakseli  
Vanteet
Materiaali: Alumiini
Rakenne: onttokammioinen, kaksinkertainen
Profiilin korkeus: Matala (<30 mm)
Rengastyyppi: Vaijerirengas/Clincher
Jarrusysteemi: levyjarru
Venttiiliporaus: 6,5 mm mm
Soveltuu tubeless-renkaille: kyllä
Leveys: 30 mm
Sisäleveys: 25 mm
Koko (tuumaa): 29 tuuma
ERTRO (leveys x halkaisija): 622 x 25 mm
Ominaisuudet & edut: Jarrukulunnanilmaisimella
Etunapa
Asennusleveys (mm): 15 mm
Akselin halkaisija, etu (mm): 100 mm
Ominaisuudet & edut: Pikalinkkuun, Tiivistetty, Kuulalaakeroitu
Pinnat
Rakenne: HYBRID-specific J-bend spokes with DT Pro Lock Squorx nipples
Rihtaus: 3 crosses
Etukiekko
Soveltuva jarrutyyppi: Center Lock -levyjarrut
Paino: 983 g
Takakiekko
Soveltuva jarrutyyppi: ---  
Kiekkosetti
Enimmäisrasitus: 150  kg
Toimituksen sisältö
1 DT Swiss H 1950 Spline Classic front wheel 29" incl. tubeless rim tape 27 mm, tubeless valve 32 mm, IS 6-bolt adapter, 5 mm QR-Kit  
Sukupuoli
Unisex
vuosimalli
2020
Tuotenro
820232
Arvostelu
Kerro mielipiteesi. Kirjoita ensimmäinen arvostelu!

TARVITSETKO APUA?
Ota yhteyttä asiantuntevaan asiakaspalveluumme paikallispuhelun hinnalla. Avoinna ma-pe klo 11-13 & klo 14-17.
09 427 04 102
UUTISKIRJE
Uutiskirjeen tilaajalle 10 € alennuskoodi kiitokseksi.
Kuule tarjouksistamme ja uutuuksistamme ensimmäisten joukossa 4.

TIETOSUOJA
Everyday we get more people on bikes