paypal.continue.text1

paypal.continue.text2
paypal.continue.text3

Odotathan vielä hetken. Tilaustasi käsitellään parhaillaan.

KESÄ-ALE - Vaatteita, kypäröitä & kenkiä | Jopa 70% ale
Alpina

Alpina Ximo Pyöräilykypärä Lapset, dog (2019)

ID: 900033
34,95 €
Ei sis. toimituskuluja
Alpina Ximo Pyöräilykypärä Lapset, dog
Alpina Ximo Pyöräilykypärä Lapset, disney rapunzel
Alpina Ximo Pyöräilykypärä Lapset, disney arielle
Alpina Ximo Pyöräilykypärä Lapset, disney donald duck
Alpina Ximo Pyöräilykypärä Lapset, star wars
Alpina Ximo Pyöräilykypärä Lapset, firefighter
Alpina Ximo Pyöräilykypärä Lapset, indian
Alpina Ximo Pyöräilykypärä Lapset, lion
Alpina Ximo Pyöräilykypärä Lapset, sheep
Mikä koko sopii minulle?
Ole hyvä ja valitse päänympärys
Lisää toivelistaan
  • 100 päivän avoin kauppa Ilmaiset palautukset
  • ILMAINEN TOIMITUS YLI 99 €, POLKUPYÖRÄT YLI 499 €6
  • 40 000 tuotetta 500 merkkiä
Tuotetiedot

Valitettavasti tuoteselostetta ei ole tällä hetkellä saatavilla suomeksi.

The Ximo from Alpina offers the best possible protection for the smallest heads. The children's helmet has a multitude of detailed solutions, all aimed at one goal - maximum safety with maximum comfort.
The Run System Classic Slide ensures a perfect fit, which can be adjusted three-dimensionally to the head and thus ensures a high level of comfort and protection. The low weight is due to the Inmold production, in which the upper shell is thermally connected to the Hi-EPS.

This results in a firm surface connection, which is responsible for a very stable construction. In addition, the edges are finished with the Edge Protect polycarbonate shell. The outer shell is designed with exclusive Disney and Star Wars designs - just like the removable, washable and inner cushions.

The air vents are strategically placed to keep sunlight away from the head while providing excellent ventilation. The rear of the helmet is flat to increase comfort in the child seat or trailer. The retrofittable Multi-Fit Light ensures high visibility at dusk or at night.

Run System CLASSIC SLIDE
The Run System allows the size of all Alpina helmets to be individually adjusted using a smooth-running rotating wheel. The Run System Classic scores with its price/performance ratio. It is a simple and robust adjustment wheel that holds the helmet securely and uncomplicatedly where it belongs: on the head.

Y-Clip
A helmet can only provide the best possible protection if it remains in the optimum position in the event of an impact. The adjustment and fixation of the two straps under the ear plays a decisive role. The Y-Clip system guarantees millimetre-precise adjustment - in a matter of seconds.

Edge Protect
Edge Protect is an additional polycarbonate sheet that refines Inmold helmets. It covers edges on the underside of the helmet. This protects the Hi-EPS and increases the longevity of the helmet. At the same time, the neck and shoulder area of the rider is protected against injuries from the helmet in the event of an impact and contact with the lower edge of the helmet.

Ergomatic
Proven hundreds of thousands of times and used on all Alpina helmets: the belt buckle with the red push button and multi-stage automatic snap-in mechanism. Ergomatic can be operated with one hand - you can loosen the strap uphill, tighten it downhill - and in the event of a fall it is not possible for the locking mechanism to open automatically.

AIRFLOW VENTS
One factor that strongly influences the wearing comfort is the ventilation of the helmet. The strategically sensible arrangement of the ventilation holes is decisive for optimum ventilation of the interior. The air is directed into the interior, directed along the head and can then flow out again at the rear. The head is therefore always pleasantly air-conditioned.

HI-EPS
The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrol). The material has microscopically small air chambers which absorb the forces acting on the helmet in the event of an impact. Hi-EPS provides optimum protection and at the same time allows extra-thin walls and narrow helmet shapes.

inmold
In the Inmold production process, the polycarbonate helmet shell is thermally bonded to the Hi-EPS inner shell of the helmet body under great heat and pressure. This creates a large-area and inseparable connection between the upper and lower shell. Advantage: The helmet is very light and at the same time extremely robust.

Ominaisuudet
Käyttötarkoitus
MTB, City/työmatka-ajo
Kypärän rakenne
In-mold-teknologai  
Toiminto
Hihnan säätöjärjestelmällä  
Säätösysteemi
Run System CLASSIC SLIDE, Y-Clip  
Kiinnitysmekanismi
Ergomaattinen suljin  
Visiiri
ei sis.  
Erityisominaisuudet
hyönteisverkko, Heijastin
Merkinnät
EN 1078  
Materiaali
Polykarbonaatti, EPS  
Sukupuoli
Lapset
vuosimalli
2019
Tuotenro
900033
Arvostelu
Kerro mielipiteesi. Kirjoita ensimmäinen arvostelu!

TARVITSETKO APUA?
Ota yhteyttä asiantuntevaan asiakaspalveluumme paikallispuhelun hinnalla. Avoinna ma-pe klo 11-13 & klo 14-17.
09 427 04 102
UUTISKIRJE
Uutiskirjeen tilaajalle 10 € alennuskoodi kiitokseksi.
Kuule tarjouksistamme ja uutuuksistamme ensimmäisten joukossa 4.

TIETOSUOJA
Everyday we get more people on bikes